Return to List

What is the important purpose of making a ray protection door?

2021-04-27

What is the important purpose of making a ray protection door?

The radiation protection door is a professional radiation prevention door, which can resist the damage of radiation to our human body. The oral cavity room, X-ray room, CT room and other places of the hospital have regulations in the state. Only places involving radiation should use this kind of door, and find a qualified professional company to make it. After the device is finished, it can be officially put into use only after passing the test by the National Disease Control Center. What is the purpose and function of making a ray protection door?
1. Shielding function of ray protection door:
The outside is stainless steel plate, the general size is 2150mm * high * 1300mm * wide * 100mm thick, keel is set inside, and 2-3mm shielding plate is lined (according to different data requirements and thickness requirements of ray instruments in different departments), so that the dose of operators can reach the national target value, and can also be customized according to needs.
2. Chain function:
The ray protection door is interlocked with the power supply of the shining device, and the ray machine cannot be opened when the door is opened. If the ray protection door is opened when the ray device is opened, it will be shut down immediately within 2 seconds.
3. Control requirements for ray protection door (lead door):
The ray protection door switch can be controlled by computer, button and manual, supporting the bus interface, showing the door condition on the computer, and the LED on the door showing the operation condition.
4. Safety requirements for ray protection door:
It has a position sensor and an infrared detector. If a person approaches or touches the door during the closing process, the door will be closed and opened actively. It has the functions of operating stroke, limit and time protection.